新浪彩票

Power fittings

Power fittings

  • Model meaning, purpose and description JXL series wedge-shaped parallel groove clamp is suitable for non-bearing connection or T connection of the conductor in the power distribution system. It is an ideal substitute for parallel groove clamp and T-type clamp. The JXD wedge and groove clamp (ballistic type) described in the brochure. Hydraulic installation tool The operation of this tool is simple and safe, and the use cost is low. installer...

    JXL series wedge parallel groove clamp
  • The product is made of high-strength anti-corrosion aluminum alloy material, which is used to fix the cable. Its hanging plate is connected with the tensioned steel wire rope. The fixing clip has a compact and reasonable structure, easy installation and no damage to the cable.

    JGX type high voltage suspension cable fixing clip
  • HXD series suspension clamp
  • Model meaning Product overview HCBX series side push pole clamps, mainly used for the connection between the lead and the stud-shaped pole and the lead of power equipment such as transformers, vacuum circuit breakers, etc. It can be used for copper, aluminum screw and copper stranded wire , Aluminum stranded wire, copper core aluminum stranded wire transitional connection. Its performance is better than ordinary bolt-type equipment clamps, with low contact resistance, grip on the wire ...

    HCBX series side push pole clamp
  • Note: The user can request tin plating, customized hole positions or no punching when required.

    Copper wire clamp for SBTB transformer (flat double hole)
  • Note: C type copper wire clamp wiring made of copper profile Note: It is made of copper profile.

    CCT copper wire clip
  • JGH high-voltage cable fixing clips (middle) products are made of high-strength anti-corrosion aluminum alloy materials for fixing the placement of cables. The clamping structure is bolted and spring-fastened. The fixing clips are compact and reasonable in structure, convenient to install and not damage the cables .

    JGH high voltage cable fixing clip (middle)
  • NXJ series overhead wedge-type insulated tension clamps are suitable for the fastening of overhead insulated aluminum core wires at corners and terminal poles. The products are equipped with 1kV, 10kV, and 20kV plastic inner wedges according to the voltage level and specifications of the wires. High-strength aluminum alloy casting, high strength, good grip, light weight, no hysteresis loss, easy installation and so on.

    NXJG Wedge Insulation Tension Clip
  • Uses JBC series insulation piercing clamps are suitable for the connection of branch lines leading from the main line in high and low voltage insulated lines or for the wiring of jumpers between two tensile sections. Precautions 1. The wire used by the piercing clamp must comply with national standards (not applicable to flame-retardant insulated cables); 2. The wire at the installation must not be bent; 3. The safety of the piercing clamp ...

    JBC series insulation piercing clamp
  • Application JBCF series insulation puncture clamp is suitable for ground protection in high and low voltage insulated lines. The clamp has a special contact tooth to ensure the best contact surface. It is also suitable for copper-aluminum over-connection. The insulating shell and the insulating silicone grease cooperate with each other and cover the insulated wire to play the role of insulation and waterproof. Cautions 1. The wire used by the puncture clamp must conform to the national ...

    JBCF series insulation puncture clamp
  • NLD-L bolt type aluminum alloy tension clamp
  • The clamp body is made of aluminum alloy, and the rest is made of hot-dip galvanized steel.

    MRJ double split spacer
  • Tensile clamp for NY aluminum clad steel wire
  • NUT adjustable clamp
  • The body and wedge of the clamp are malleable cast iron and hot-dip galvanized. The closed pin is made of stainless steel and the rest are hot-dip galvanized steel.

    NX, LX wedge clamp
  • A set of hot-dip galvanized steel parts.

    FX anti-theft cap
  • The clamp parts are made of hot-dip galvanized steel

    NLY adjustable clip
  • DLF5 shunt clamp (five branches)
  • The clamp body and cover are made of aluminum alloy, and the rest are made of hot-dip steel.

    JB aluminum parallel groove clamp
  • The clamp body and cover are made of copper, and the rest are made of hot-dip steel.

    JBT copper parallel groove clamp (for copper stranded wire)

  • Hongguang Electric Group Co., Ltd. it@hamaddar.com
  • Scan the official WeChat QR code with surprise
  • Hongguang Electric Group Co., Ltd. 86-577-62057777 Weiqi Road, Yueqing Economic Development Zone, Zhejiang 325600
  • Hongguang Electric Group Co., Ltd. International Trade Department 86-577-62058899 Working hours: 8: 00-17: 00
a